tagline

MDF BOARD

logo5

 


finsa ce

 

TECHNICAL INFORMATION

FINLIGHT
TECHNICAL DATA-AVERAGE VALUES Rev: 10/28/2015
PROPERTIES TEST METHOD UNITS THICKNESSES mm
      7/9 >9/12 >12/19 >19/30
FACES MDF THICKNESSES   mm 3 6 3 6
DENSITY (*) EN 323 kg/m3 770/740 735/720 720/675 675/655
INTERNAL BOND EN 319 N/mm2 0,75 0,65 0,55 0,55
BENDING STRENGTH EN 310 N/mm2 23 22 20 18
MODULUS OF ELASTICITY EN 310 N/mm2 2700 2500 2200 2100
THICKNESS SWELLING 24 H EN 317 % 17 15 12 10
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318 % 0,4 0,4 0,4 0,3
DIMENSIONAL MOVEMENT TICKNESS EN 318 % 6 6 6 5
SURFACE SOUNDNESS EN 311 N/mm2 1,2 1,2 1,2 1,2
SURFACE ABSORPTION (TWO FACES) EN 382-1 mm > 150 > 150 > 150 > 150
MOISTURE CONTENT EN 322 % 7+/-3 7+/-3 7+/-3 7+/-3
GRIT CONTENT ISO 3340 % Weight ≤ 0,05 ≤ 0,05 ≤ 0,05 ≤ 0,05
FORMALDEHYDE CONTENT EN 120 mg/100 g ≤ 8 ≤ 8 ≤ 8 ≤ 8
REACTION TO FIRETABLA EN 13986:2004+A1 I EN 13501-1 Class E D-s2,d0(**) D-s2,d0(***) D-s2,d0
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ) EN 13986:2004+A1 α 0.1 0.1 0.1 0.1
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ) EN 13986:2004+A1 α 0.2 0.2 0.2 0.2
THERMAL CONDUCTIVITY EN 13986:2004+A1 W/ (m·K) 0.13 0.13 0.12 0.12
AIRBORNE SOUND INSULATION (SURFACE MASS) (R) EN 13986:2004+A1 db 22/24 24/26 26/28 29/30
WATER VAPOUR PERMEABILITY WET CUP / DRY CUP EN 13986:2004+A1 μ 18/28 17/27 16/25 15/24
BIOLOGICAL DURABILITY USE EN 13986:2004+A1 Use classes 1 1 1 1
CONTENT OF PENTACHLOROPHENOL (PCP) EN 13986:2004+A1 % <5 <5 <5 <5
SCREW HOLDING. SURFACE EN-320 N 600 600 600 600

 

TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIES TEST METHOD UNITS THICKNESSES mm
      7/9 >9/12 >12/19 >19/30
THICKNESS EN 324-1 mm +/-0,2 +/-0,2 +/-0,2 +/-0,3
LENGTH/WIDTH EN-324-1 mm +/- 2 mm/m, máx +/- 5 mm. +/- 2 mm/m, máx +/- 5 mm. +/- 2 mm/m, máx +/- 5 mm. +/- 2 mm/m, máx +/- 5 mm.
SQUARENESS EN 324-2 mm/m +/- 2 +/- 2 +/- 2 +/- 2
EDGE STRAIGHTNESS EN-324-2 mm/m +/-1,5 +/-1,5 +/-1,5 +/-1,5

 

(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

(**) Mounted without an air gap behind the FIBRAPAN.

Mounted with a closed air gap not more than 22 mm behind the FIBRAPAN classificationD-s2,d2.

Classification E for any other more restrictive condition. Commission Decision 2007/348/EC.

(***) Mounted without an air gap behind the FIBRAPAN, or with a closed air gap behind the FIBRAPAN for thicknesses equal or greater than 15mm or with an open air gap behind the FIBRAPAN for thicknesses equal or greater than 18 mm.

Mounted with a closed air gap not more than 22 mm behind the FIBRAPAN classification D-s2,d2 in thicknesses between 10 and 18 mm. Commission Decision 2007/348/EC.

These physical-mechanical values improve/comply with those established by EN 622-5:2009 European Standard, Table 3. Requirements for general purpose boards for use in dry conditions (type MDF).

FIBRAPAN meets Class E1 requirements (analysed according to EN 120) as defined in EN 622-1:2003 European Standard.

FIBRAPAN is endorsed by AITIM Quality Labels.

FIBRAPAN STRIP meets these physical-mechanical characteristics declared.

 

 

DECLARATION OF PERFORMANCE Nº 00114

FIBRAPAN Manufactured At:
Finsa Fibranor Finsa Orember Finsa Padrón Luso Finsa Finsa France SAS
Políg. Ind. de Rábade Políg. Ind. San Cibrao das Viñas Paraíso s/n Estrada Nacional 234, Km 92.7 151, Route de Hourés
27370 RÁBADE (ESPAÑA) 32911 OURENSE (ESPAÑA) 15900 PADRÓN (ESPAÑA) 3524-952 NELAS (PORTUGAL) 40110 MORCENX (FRANCE)
PRODUCT TYPE INTENDED USE AVCP*
MDF Internal use as non structural component in dry conditions 4

*Assessment and verification of constancy of performance system according to Annex V of regulation (EU) No 305/2011

 

TECHNICAL DATA-AVERAGE VALUES
Rev: 10/28/2015
PROPERTIES TEST METHOD UNITS THICKNESSES mm
      7/9 >9/12 >12/19 >19/30
DENSITY (*) EN 323 kg/m3 770/740 735/720 720/675 675/655
INTERNAL BOND EN 319 N/mm2 0,75 0,65 0,55 0,55
BENDING STRENGTH EN 310 N/mm2 23 22 20 18
MODULUS OF ELASTICITY EN 310 N/mm2 2700 2500 2200 2100
THICKNESS SWELLING 24 H EN 317 % 17 15 12 10
DIMENSIONAL MOVEMENT LENGTH/WIDTH EN 318 % 0,4 0,4 0,4 0,3
DIMENSIONAL MOVEMENT TICKNESS EN 318 % 6 6 6 5
SURFACE SOUNDNESS EN 311 N/mm2 1,2 1,2 1,2 1,2
SURFACE ABSORPTION (TWO FACES) EN 382-1 mm > 150 > 150 > 150 > 150
MOISTURE CONTENT EN 322 % 7+/-3 7+/-3 7+/-3 7+/-3
GRIT CONTENT ISO 3340 % Weight ≤ 0,05 ≤ 0,05 ≤ 0,05 ≤ 0,05
FORMALDEHYDE CONTENT EN 120 mg/100 g ≤ 8 ≤ 8 ≤ 8 ≤ 8
REACTION TO FIRETABLA EN 13986:2004+A1 I EN 13501-1 Class E D-s2,d0(**) D-s2,d0(***) D-s2,d0
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ) EN 13986:2004+A1 α 0.1 0.1 0.1 0.1
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ) EN 13986:2004+A1 α 0.2 0.2 0.2 0.2
THERMAL CONDUCTIVITY EN 13986:2004+A1 W/ (m·K) 0.13 0.13 0.12 0.12
AIRBORNE SOUND INSULATION (SURFACE MASS) (R) EN 13986:2004+A1 db 22/24 24/26 26/28 29/30
WATER VAPOUR PERMEABILITY WET CUP / DRY CUP EN 13986:2004+A1 μ 18/28 17/27 16/25 15/24
BIOLOGICAL DURABILITY USE EN 13986:2004+A1 Use classes 1 1 1 1
CONTENT OF PENTACHLOROPHENOL (PCP) EN 13986:2004+A1 % <5 <5 <5 <5

 

(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.
 
(**) Mounted without an air gap behind the FIBRAPAN.
Mounted with a closed air gap not more than 22 mm behind the FIBRAPAN classificationD-s2,d2.
Classification E for any other more restrictive condition. Commission Decision 2007/348/EC.
 
(***) Mounted without an air gap behind the FIBRAPAN, or with a closed air gap behind the FIBRAPAN for thicknesses equal or greater than 15mm or with an open air gap behind the FIBRAPAN for thicknesses equal or greater than 18 mm.
 
Mounted with a closed air gap not more than 22 mm behind the FIBRAPAN classification D-s2,d2 in thicknesses between 10 and 18 mm. Commission Decision 2007/348/EC.
 
These physical-mechanical values improve/comply with those established by EN 622-5:2009 European Standard, Table 3. Requirements for general purpose boards for use in dry conditions (type MDF).
 
FIBRAPAN meets Class E1 requirements (analysed according to EN 120) as defined in EN 622-1:2003 European Standard.
 
FIBRAPAN is endorsed by AITIM Quality Labels.
 
FIBRAPAN STRIP meets these physical-mechanical characteristics declared.
 
The performance of the reference product are in compliance with the performance declared above
 
This Declaration of Perfomance is issued under the sole responsibility of FINANCIERA MADERERA S.A. (FINSA)

Javier Portela