tagline

Melamine Panels

image2

img3

 

FIMAPLAST CHIPBOARD
THICKNESS (mm)

Quality Format
(mm)
8 10 15 16 18 19 22 25 30 35 40
Standard 2440 X 1220   x   x x x     x    
2440 X 2100 x x x x x x   x x x x
2850 X 2100 x x   x x x x x x   x
Moisture Resistant 2440 X 1220   x   x   x          
2440 X 2100       x   x          
2850 X 2100       x   x          
Fire Resistant 2850 X 2100       x   x          

 

FIBRAPLAST MDF BOARD
THICKNESS (mm)

Quality Format
(mm)
3 4 5 6 16 18 19 22
Standard 2440 X 1220 x x x x x x x  
2440 X 2100 x x x x x x x  
2850 X 2100         x x x  

 

 

SUPERPAN DECOR SPECIAL BOARD
THICKNESS (mm)

Quality Format
(mm)
10 12 15 16 18 19 22 25 30
Standard 2440 X 1220 x     x x x     x
2440 X 2100 x     x x x      
2600 X 2100 x x   x   x      
2850 X 2100 x     x x x x x x
Moisture Resistant 2440 X 1220       x   x     x
2850 X 2100       x   x      

 

PACK SIZE

Boards Per Pack
Fimaplast / Fibraplast / Superpan Decor

Format
(mm)
3 4 5 6 8 10 12 15 16 18 19 22 25 30 35 40
2440 X 1220 100 100 100 100   60   50 46 40 42     26    
2440 X 2100 100 100 100 90 30 30   36 36 32 28   24 20 16 12
2600 X 2100           30 30   36   28     20    
2850 X 2100         30 30     36 32 28 24 24 20   12

 

FIMAPAN
TECHNICAL DATA-AVERAGE VALUES Rev: 05/10/2016
PROPERTIES TEST METHOD UNITS THICKNESSES mm
>4-6 >6-13 >13/20 >20/25 >25/32 >32/40 >40
DENSITY (*) EN 323 kg/m3 720/700 700/650 650/620 620/595 590/580 575/560 550
INTERNAL BOND EN 319 N/mm2 ≥ 0,45 ≥ 0,40 ≥ 0,35 ≥ 0,30 ≥ 0,25 ≥ 0,20 ≥ 0,20
BENDING STRENGTH EN 310 N/mm2 ≥ 12 ≥ 11 ≥ 11 ≥ 10,5 ≥ 9,5 ≥ 8.5 ≥ 7
MODULUS OF ELASTICITY EN 310 N/mm2 ≥ 1950 ≥ 1800 ≥ 1600 ≥ 1500 ≥ 1350 ≥ 1200 ≥ 1050
THICKNESS SWELLING 2 H EN 317 % ≤ 6 ≤ 6 ≤ 6 ≤ 6 ≤ 6 ≤ 6 ≤ 6
SURFACE SOUNDNESS EN 311 N/mm2 ≥ 0,8 ≥ 0,8 ≥ 0,8 ≥ 0,8 ≥ 0,8 ≥ 0,8 ≥ 0,8
MOISTURE CONTENT EN 322 % 8+/-3 8+/-3 8+/-3 8+/-3 8+/-3 8+/-3 8+/-3
FORMALDEHYDE CONTENT EN ISO 12460-5 mg/100 g ≤ 8 ≤ 8 ≤ 8 ≤ 8 ≤ 8 ≤ 8 ≤ 8
REACTION TO FIRETABLA EN 13986:2004+A1:2015 I EN 13501-1 Class E D-s2,d0** D-s2,d0*** D-s2,d0 D-s2,d0 D-s2,d0 D-s2,d0
REACTION TO FIRETABLA EN 13986:2004+A1:2015 I EN 13501-1 Class NPD Dfl-s1**** Dfl-s1 Dfl-s1 Dfl-s1 Dfl-s1 Dfl-s1
SOUND ABSORPTION COEFFICIENT (Α) (250 A 500 HZ) EN 13986:2004+A1:2015 α ≥ 0.10 ≥ 0.10 ≥ 0.10 ≥ 0.10 ≥ 0.10 ≥ 0.10 ≥ 0.10
SOUND ABSORPTION COEFFICIENT (Α) (1000 A 2000 HZ) EN 13986:2004+A1:2015 α ≥ 0.25 ≥ 0.25 ≥ 0.25 ≥ 0.25 ≥ 0.25 ≥ 0.25 ≥ 0.25
THERMAL CONDUCTIVITY EN 13986:2004+A1:2015 W/ (m·K) ≤ 0.14 ≤ 0.14 ≤ 0.13 ≤ 0.12 ≤ 0.12 ≤ 0.12 ≤ 0.11
AIRBORNE SOUND INSULATION (SURFACE MASS) (R) EN 13986:2004+A1:2015 db NPD ≥ 24 ≥ 26 ≥ 28 ≥ 29 ≥ 31 ≥ 32
WATER VAPOUR PERMEABILITY WET CUP / DRY CUP EN 13986:2004+A1:2015 μ ≥ 17 / ≥ 50 ≥ 16 / ≥ 50 ≥ 15 / ≥ 50 ≥ 15 / ≥ 50 ≥ 15 / ≥ 50 ≥ 15 / ≥ 50 ≥ 14 / ≥ 50
BIOLOGICAL DURABILITY USE EN 13986:2004+A1:2015 Use classes 1 1 1 1 1 1 1
CONTENT OF PENTACHLOROPHENOL (PCP) EN 13986:2004+A1:2015 % < 5 < 5 < 5 < 5 < 5 < 5 < 5

 

TOLERANCE ON NOMINAL DIMENSIONS
PROPERTIES TEST METHOD UNITS THICKNESSES mm
>4-6 >6-13 >13/20 >20/25 >25/32 >32/40 >40
THICKNESS EN 324-1 mm +/-0,3 +/-0,3 +/-0,3 +/-0,3 +/-0,3 +/-0,3 +/-0,3
LENGTH/WIDTH EN-324-1 mm +/- 5 +/- 5 +/- 5 +/- 5 +/- 5 +/- 5 +/- 5
SQUARENESS EN 324-2 mm/m +/- 2 +/- 2 +/- 2 +/- 2 +/- 2 +/- 2 +/- 2
EDGE STRAIGHTNESS EN-324-2 mm/m +/-1,5 +/-1,5 +/-1,5 +/-1,5 +/-1,5 +/-1,5 +/-1,5

 

(*) VALUES TO BE CONSIDERED AS A ROUGH GUIDE ONLY.

(**) Minimun thickness 9mm.Mounted without an air gap behind the FIMAPAN. Mounted with a closed air gap not more than 22 mm behind the FIMAPAN classificationD-s2,d2. Classification E for any other more restrictive condition. Commission Decision 2007/348/EC.

(***) Mounted without an air gap behind the FIMAPAN, or with a closed air gap behind the FIMAPAN for thicknesses equal or greater than 15mm or with an open air gap behind the FIMAPAN for thicknesses equal or greater than 18 mm. Mounted with a closed air gap not more than 22 mm behind the FIMAPAN classification D-s2,d2 in thicknesses between 10 and 18 mm. Commission Decision 2007/348/EC

(****)Minimun thickness 9 mm

These physical-mechanical values improve/comply with the P2 classification established in EN 312:2010 European Standard, Table 3. Boards for indoor applications (including furniture) in dry environments (Type P2). Requirements for the specified mechanical properties.

This product meets Class E1 requirements (analysed according EN 120) as defined in EN 312:2010 European Standard.

This product is endorsed by AITIM Quality Labels.